QUICK LINKS ...

No Downtime Roller Exchange
Folder Roller Recovery
MBO Fold Rollers
Stahl Fold Rollers
Baum & Other Fold Rollers
Segmented Gluing Rollers
Vacuum Wheels
MBO & Stahl Folder Parts



    Folder Rollers YouTube Folder Rollers Facebook

The manufacturer names listed in this site are registered trademarks of those companies.


MBO and Stahl Folder Accessories for Folding Machines

We have the folder accessories most customers need for changing our the rollers in their folding machines. These include bearings, couplers, brass blocks and washers. Be sure to add them to your recovery, roller exchange, and new roller order.

We package the basic repair parts in Roller Paks shown below. The MBO Roller Pak includes one coupling, two bushings, two small brass blocks, and two spring washers. The Stahl Roller Pak includes two one-piece bearings, two spring washers, one hanger washer, 2 hanger bushings, and two hanger spacer washers. We suggest you order at least two or three Roller Paks (see below) to have ready during change-out, as the first couple of rollers see the most wear on these parts.

When do you need to replace these parts?
  • MBO Roller Pak

    • COUPLER: If you can rotate a roller more than 1/8" when it is in the stationary mode (not moving), then the coupling needs to be replaced. Test each roller and coupling separately.
    • SQUARE BRASS BLOCKS: If you cannot adjust the roller to accommodate varying thickness of paper without problems, or takes longer than normal, then your brass blocks are worn and need replacing. However, the brass blocks can be turned over and reused before replacing.
    • HANGER BUSHINGS: If the roller hanger can be moved sideways more than .03", then the liner bushing needs to be replaced.
    • BEARING SPRING WASHERS: These ensure that the the rollers stay in position from side to side and should be replaced during change-out.
  • MBO Bearings

    Always replace the bearings during a change out by adding them to your order or obtaining them from a local distributor. Running old bearings runs the risk of destroying the roller if the bearings seize up.
  • Stahl Roller Pak

    • HANGER BUSHINGS: If the roller hanger can be moved sideways more than .03", then the liner bushing needs to be replaced.
    • HANGER WASHERS (or SHIMS): These .003" thick washers are necessary to prevent the hangers from rubbing on the folder's frame (don't use paper for this purpose).
    • SPRING WASHERS: These ensure that the the rollers stay in position from side to side and should be replaced during change-out.
    • BEARINGS: Always replace the bearings during a change out by adding them to your order. Running old bearings runs the risk of destroying the roller if the bearings seize up.
    • BEARING SPACER: To control end play.
MBO Folder Accessories Prices & Order Form
Stahl Folder Parts Prices & Order Form
 
 
MBO Change-Out Roller Pak,
$35.00 per Roller
MBO Bearings
$10.00 per roller (set of 2)
Stahl Change-Out Roller Pak,
With Bearings, $85.00 per Roller
Stahl Bearings
$70.00 per roller (set of 2)
MBO Adjustable Ball Cup, $7.50 MBO Non-Adjustable Ball Cup, $5.50 Stahl 35mm Ball Cup, $4.00 Transport Collar, non-perforating,
35 mm, Recovered, $35.00

We manufacture folder parts, specializing in folder rollers with high performance soft urethane for maximum productivity, segmented gluing rollers, and vacuum wheels, for all makes of OEM buckle folders. Restore your buckle folder fold rollers using our Recovery and Exchange programs for folder rollers and vacuum wheels. We can also convert any buckle fold folder, old or new, to "spiral grip" fold rollers or TH rollers that have superior grip. All folder rollers are available in 'high grip' urethane for faster running speeds with aqueous stock. We replace your old urethane using a heat bond process of 90 durometer Uniroyal urethane, which is an exact match to all OEM buckle folder rollers.


FolderRollers.com | 2283 Camel Rd | Benicia, CA 94510
TEL: (707) 745-9199 | FAX: (707) 745-9166 | EMAIL: sales@folderrollers.com